|
Standard Number
|
Standard Description
|
Type
|
Application(s)
|
|
U.S. Government (Federal
Test Method & Military Standards)
|
|
MIL-STD-1686
(see ESDA)
|
Electrostatic Discharge Control Program for Protection of
Electrical and Electronic Parts, Assemblies and Equipment
|
S
|
Defines ESD Control program
|
|
FTM STD. NO. 101C, Method 4046.1, 1982
|
Test Procedures for Packaging Materials
Electrostatic Properties of Materials
|
STM
|
Determine electrostatic properties of materials in film &
sheet form
|
|
MIL-STD-750C/4,
Method 1020, 1983
|
Electrostatic Discharge Sensitivity Classification
|
STM
|
Device (semiconductor) sensitivity classification
|
|
MIL-STD-785
|
Electronic Component Failure Analysis
|
S
|
Device failure analysis
|
|
MIL-STD-883D,
Method 3015.7
|
Electrostatic Discharge Sensitivity Classification
|
STM
|
Devices - defining ESD sensitive
|
|
MIL-HDBK-263B
|
ESD Control Handbook for Protection of Electrical and Electronic
Parts Assemblies and Equipment
|
S
|
Devices –defining ESD sensitivity. General ESD control program.
|
|
MIL-W-87893A
|
Workstation, Electrostatic Discharge Control
|
S
|
ESD Workstations
|
|
MIL-STD-454
|
Standard General Requirements for Electronic Equipment
|
S
|
Grounding
|
|
MIL-HDBK-773, 1988
|
Electrostatic Discharge Protective Packaging
|
S
|
Packaging
|
|
MIL-STD-129M, 1993
|
Marking for Shipment and Storage ESD Standard List
|
S
|
Symbols
|
|
Cenelec Electronic Components
Committee (CECC)
|
|
CECC 00015/1
|
Protection of Electrostatic Sensitive Devices, Part 1: General
Requirements
|
S
|
General ESD control protection for electronic devices &
assemblies
|
|
EN 100 015/1-1991
|
Protection of Electrostatic-Sensitive Devices, Part 1: Minimum
Requirements
|
S
|
General ESD control protection for electronic devices &
assemblies
|
|
EN 61000-4-2, 1996
|
Test and Measurement Techniques – Section2: Electrostatic
Discharge Immunity Test
|
S
|
Device sensitivity testing
|
|
IEC (International Electrotechnical
Commission)
|
|
CISPR 24 (1997-09)
|
Information technology equipment - Immunity characteristics
- Limits and methods of measurement
|
S
|
Defines the immunity test requirements for information technology
equipment incl. ESD
|
|
IEC-61000-4-2 (1995)
|
Test and Measurement Techniques – Section2: Electrostatic
Discharge Immunity Test. Basic EMC Pub.
|
STM
|
Immunity requirements for electronic equipment subjected
to ESD
|
|
IEC-60093 (1980)
|
Methods of Test for Volume Resistivity and Surface Resistivity
of Solid Electrical Insulating Materials
|
STM
|
Measure volume and surface resistance & resistivity
|
|
IEC 60417-1 (1998)
|
Graphical symbols for use on equipment - Part 1: Overview
and application
|
S
|
Symbols
|
|
ASTM (American Society
of Testing and Materials)
|
|
ASTM D-257-91
|
Standard Test Method for direct current (DC) Resistance or
Conductance of Insulating Materials
|
STM
|
Measure resistance of insulative/dissipative materials
|
|
ASTM D-991-89
|
Standard Test Method for Rubber Property-Volume Resistance
of Electrically Conductive and Antistatic Products
|
STM
|
Measure volume resistance of electrically conductive or antistatic
rubbers
|
|
EIA (Electronics Industry
Association)
|
|
ANSI/EIA-541-88
|
Packaging Material Standards for ESD Sensitive Items
|
S
|
Packaging materials
|
|
ANSI/EIA-583-91
|
Packaging Material Standards for Moisture Sensitive items
|
S
|
Packaging materials
|
|
ANSI/EIA-625-1994
|
Requirements for Handling Electrostatic-Discharge-Sensitive
(ESDS) Devices
|
S
|
General ESD Control program
|
|
EIA-471
|
Symbol and Label for Electrostatic Sensitive Devices
|
S
|
Labels, symbols
|
|
American Telephone and
Telegraph (AT&T and AT&T Bell Labs)
|
|
T1Y1/88-029
|
American National Standard Central Office Equipment – Electrostatic
Discharge Requirements
|
S
|
ESD requirements
|
|
AT&T Electrostatic discharge Control Handbook
|
S
|
General ESD Program
|
|
ISO (International Standards
Organization)
|
|
ISO 2878
|
Rubber, Vulcanized-Antistatic and Conductive Products, Determination
of Electrical Resistance
|
S
|
Measure resistance of rubber based items <1E8 Ohms
|
|
American National Standards
Institute (ANSI)
|
|
ANSI C63.16 – 1993
|
Guide for Electrostatic Discharge Test Methodologies and
Criteria for Electronic Equipment
|
STM
|
Device sensitivity testing
|
|
ANSI Z41-1991
|
Footwear Resistive Characterization
|
S
|
Shoes
|
|
American Association
of Textile Chemist and Colorists (AATCC)
|
|
AATCC Step Test, Method 134-1986
|
Electrostatic Propensity of Carpets
|
STM
|
Floors, Carpets
|
|
AATCC Test Method 76-1987
|
Electrical Resistivity of Fabrics
|
STM
|
Smocks, Lab Coats, Gloves, Coverings, other fabric products
|
|
National Fire Protection
Association (NFPA)
|
|
NFPA 77-1983
|
Recommended Practice on Static Electricity
|
STM
|
Controlling Fire/Ignition Hazards from Static Electricity
|
|
Occupational Safety
and Health Administration (OSHA)
|
|
OSHA 3075, 1988
|
Controlling Electrical Hazards
|
S
|
Personal safety
|
|
Institute for Interconnecting
and Packaging Electronic Circuits (IPC)
|
|
ANSI/IPC-A-610, 1996
|
Acceptability of Electronic Assemblies
|
S
|
General ESD control practices
|
